The Tandem Tower CORNERSTONE® system includes 12 attachment types and uses true 3 in x 3 in (76 mm x 76 mm) uprights with 1 in (25.4 mm) holes and 2 in (50.8 mm) spacing. Some seated and bench accessories require the Tandem Tower Center Connector.
Included with the Tandem Tower
- Aluminum revolving lat pulldown bar
- Close grip triangle and landmine handle
- Single knurled handles, pair
- Low row footplate
- Aluminum pulleys
- Four oval black carabiners
- Two extension chains
- Six pegboard pins
- Cable connector
- Two magnetic band pegs
- Four hexagon L-brackets
- Low row footplate holder
Accessories that require the Center Connector
The following accessories require the Tandem Tower Center Connector for the supported Tandem Tower configuration:
Connecting two Tandem Towers
The Tandem Tower Cross Beam Connector Set joins two complete Tandem Towers into a wide cable crossover system. It is not needed for a standard single Tandem Tower.
Third-party compatibility
Many attachments built for 3 in x 3 in uprights, 1 in holes, and 2 in spacing can fit. Confirm dimensions, pin engagement, clearance, and load rating before use. Never use an attachment that interferes with the cables, weight stack, or anchoring system.
Comments
0 comments
Article is closed for comments.