The assembled Force USA Tandem Tower CORNERSTONE® system measures 53 in wide x 58.5 in deep x 87 in high (135 cm x 149 cm x 221 cm). Force USA recommends at least 3 in (7.6 cm) of clearance above the unit.
Tandem Tower dimensions
- Exterior: 53 in wide x 58.5 in deep x 87 in high (135 cm x 149 cm x 221 cm)
- Recommended minimum ceiling height: 90 in (229 cm)
- Assembled product weight: approximately 720 lb (327 kg)
Wall clearance and working space
The listed dimensions are the machine footprint. Leave enough space behind and beside the tower for assembly, inspection, cable movement, and attachment changes. The Freestyle trolleys and connected handles must move through their full paths without contacting a wall or stored equipment.
If you plan to add the Center Connector, Sliding Bench, Swivel Seat, or Cross Beam Connector Set, measure the complete upgraded configuration before assembly. The Sliding Bench requires substantially more depth when extended.
Floor anchoring
The Tandem Tower can stand before anchoring, but Force USA recommends bolting it to the floor for the safest setup. Four hexagon L-brackets are included. The correct anchor type depends on the floor construction, so consult a qualified installer when needed.
Before assembly
- Confirm the floor is level and can support the machine and training load.
- Measure doors, stairs, hallways, and turns along the delivery path.
- Keep the required ceiling and cable clearances free of lights, garage hardware, and ceiling joists.
Comments
0 comments
Article is closed for comments.