The M10 CORNERSTONE® Trainer uses 2 in x 2 in (50.8 mm x 50.8 mm) uprights with 5/8 in (15.9 mm) holes and 2 in (50.8 mm) spacing. Attachments made for 3 in x 3 in uprights with 1 in holes are not direct fits.
Included with the M10
- Aluminum lat pulldown bar
- Single knurled handles, pair
- Close grip and landmine handle
- Magnetic landmine
- Bodyweight assist strap
- Tricep rope
- Ankle cuff
- Eight black carabiners
- Four extension chains
- Eight weight plate storage horns
- Pin-Lock J-Cups, pair
- Pin-Lock Spotter Arms, pair
- Barbell holder
- Magnetic collars, pair
- Eight spring collars
- Four Mag Pins
- Four hexagon L-brackets
- Four 2 in pegboard pins
- Double hook pins, pair
- Pull-up handles, pair
Compatibility standard
An add-on should match all three M10 dimensions: 2 in x 2 in uprights, 5/8 in holes, and 2 in spacing. Pin length, backer plates, frame clearance, and load ratings must also be checked.
Current Force USA accessories designed specifically for 3 in x 3 in uprights, including the 3x3 Swivel Seat and 3x3 Leg Holder and Low Row Footplate, are not direct fits on the M10's 2x2 frame. Do not force a 3x3 mounting bar or use an undersized pin.
Third-party attachments
Some third-party 2 in x 2 in attachments with 5/8 in pins may fit the M10. Force USA cannot guarantee another manufacturer's tolerances or ratings. Confirm that the attachment locks fully and does not interfere with the Smith Machine, Freestyle Pulley Arms, cables, storage, or safety hardware.
If an accessory page does not specifically list the M10, contact support@forceusa.com or call (800) 566-4949 before ordering.
Comments
0 comments
Article is closed for comments.